BOBBIN RACKS

BOBBINS AND CONES HOLDER
With 8 pegs and 8 eyes as guides. For use with warping boards or vertical warping mills.

6361-1000

BOBBIN RACK

Can hold forty 4" (102 mm) spools. Built like a frame: 21" x 37" (53 cm x 94 cm) with two removable supports. The pins are fixed to a central post that can be turned when removing bobbins.
6362-1000

THREAD GUIDE FOR BOBBIN RACK

Specially needed when warping with yarn on tubes,
this thread guide prevents the yarn from slipping off the
 end of the bobbin by always pulling from the center. It has 
2 thread guides, each having 20 thread hooks.
6362-2000

BOBBIN RACK WITH THREAD GUIDE INSTALLED: 
6362-3000

STUDIO BOBBIN AND CONE RACK
This bobbin rack can hold 50 : 4" - diameter bobbins (or tubes) or 30 : 8" - diameter cones. Each thread is guided by a pig tail eye which makes the treading easier; there is an additional row of pig tail eyes so that all bobbins of all sections can be either unwound by the end or unrolled. The bobbin rack can be folded for storage. During the warping, it must be open to an angle which will give it stability and uniform tension in the threads.

6362-9900